FLEX PRO

Full Body Harnesses

Art. no.

Weight

Comfortable, practical harness for working in fall risk areas. Equipped with a fall indicator and wide back padding, it is pleasant to wear and adapts perfectly to any body shape.

Select colour:

Select size:

S-M

L-XL

XXL

Find your size

Sizing Chart

Here you will find the current size chart. For an optimal fit, measure your feet according to the instructions below.

Size	Body Height	Hip Circumference	Thighs Circumference
S - M	61.0 - 70.9 in	29.1 - 42.9 in	17.3 - 33.5 in
L - XL	68.9 - 76.8 in	33.9 - 52.4 in	17.3 - 38.6 in
XXL	72.8 - 80.7 in	38.6 - 68.5 in	18.5 - 43.7 in

HOW TO MEASURE CORRECTLY

To determine the correct size, take the following measurements with a measuring tape by guiding the measuring tape once around the respective part of the body. It is easier and more precise if you have a second person help you. Make sure that the measuring tape does not constrict when measuring or is guided too loosely around the measured body part.

Body Height: Measure barefoot from floor to crown while standing upright and ideally with your back to the wall.

Hip Circumference: Measure just above the hips while standing upright and hip-width apart.

Thighs Circumference: Measure around the widest part of both thighs while standing.

This item is only available at specialised dealers.

- Easy to put on and adjust to any body size thanks to the jacket system
- Integrated, removable back plate for enhanced protection, for example when climbing in confined spaces
- Textile fall arrest eyelets (dorsal and two-part sternal) in accordance with EN 361 remain open under preload and allow a further carabiner to be easily attached
- Fall indicator in the back padding; a red label becomes visible in the window in the back plate following a load of over 6 kN
- All load-bearing straps are equipped with indicator tape; red fibres become visible in the event of damage
- Textile joints for optimum adaptation to movements even when the straps are pulled tight
- Shoulder padding with RFID pocket, labelling field and attachment option for the wireless device
- Easy Glider buckle on the shoulder straps for easy adjustment, detachable strap keeper for cleanly stowing away the straps
- Detachable leg padding
- 3D mesh with a closed surface structure prevents the adhesion of dirt and chippings and enables good air circulation
- Triple Lock buckles on the legs and hips for extra safety
- Two large aluminium D-rings as side eyelets according to EN 358 provide a work position and a stand-by position for fastening a lanyard
- Four textile gear loops
- Four attachment options for EDELRID Tool Bags (load: 25 kg)
- Textile fall arrest eyelets (dorsal and two-part sternal) in accordance with EN 361 remain open under preload and allow a further carabiner to be easily attached
- Maximum weight of user: 150 kg
EDELRID technologies
- Certification : EN 361
- Certification : EN 358
- Certification : ANSI / ASSE Z359.11-2014
- Fall Arrest Eyelet Front
- Fall Arrest Eyelet Back
- Lataral Eyelets
- Adjustable leg loops
- Moveable foam waist padding
EDELRID technologies
EDELRID technologies