Warning CONECTO

Supplement dated 20 September, 2018

We point out that the products „Conecto", „Conecto Small" and „Conecto Swivel" from production year 2014 and forward, as far as in orginal and unmodified condition (these products are always delivered with black screws) are not affected to review for this call.

Supplement dated 20 September, 2018

We point out that the products „Conecto", „Conecto Small" and „C …

Supplement dated 20 September, 2018

We point out that the products „Conecto", „Conecto Small" and „Conecto Swivel" from production year 2014 and forward, as far as in orginal and unmodified condition (these products are always delivered with black screws) are not affected to review for this call.

During the course of extensive checking of the bolts on the hardware products "Conecto", "Conecto Small" and "Conecto Swivel"by EDELRID, it was ascertained that:

  • many of the bolts were not inspected yearly,
  • some of the bolts were damaged (the only way to detect if the bolt is damaged is by checking the torque),
  • some of the bolts had been replaced by users with bolts that did not have the required strength class.

The bolts in question are safety-relevant components that are made of a special high-strength steel alloy. Using bolts of an inferior strength, reduces the strength of the whole product. In addition, all bolts should be tightened to the required torque and regularly inspected. Disregarding the instructions for usage and the rules listed below can cause the entire device to fail. This may result in serious injury or death.

In view of these findings, EDELRID calls upon all users of the hardware products "Conecto", "Conecto Small", "Conecto Swivel" and the systems listed below to withdraw them from use immediately. EDELRID is supplying all customers with replacement bolts, free of charge. To ensure unambiguous identification, these replacement bolts have a black coating. Once the silver bolts have been replaced with black bolts according to the replacement manual, the products may be used again.

Please understand that EDELRID cannot assume liability for possible damages related to the continued use of silver bolts or other bolts.

  • Scope (88116 / 88117)
  • Belay Kit (76014 / 76015)
  • Tree Core (88050)
  • Core Plus CL (88058)
  • Core Plus (88057)
  • Core Top (88041)
  • Core Sliding D-Kit (88052)

In order to ensure transparency and unambiguous identification on the market, the bolts in unused products or products still in their original packaging must also be replaced.

Please use the enclosed request form to order the new black bolts (incl. nuts and, if applicable, screw plugs). We will do our best to send the bolts out as quickly as possible after receipt of your request.

Please fill in the request form and send it by

e-mail to: [email protected] or by Fax to +49 (0)7562 981-100.

 

We ask for your understanding that orders of bolts cannot be sent out unless we have received a signed request form.
If you have any questions, please contact us on: +49 (0)7562 981-0.

We are aware of our responsibility towards our customers and make the safety of our products our primary objective.

Best regards,
Your EDELRID Team