-
Description
-
Features
- Special accessory cord made of a combination of high-strength polyamide and aramid
- Withstands two required standard falls for dynamic twin rope tests according to EN 892
- Suitable for hauling equipment or abseiling, thanks to the low elongation values
- 3D lap coiling enables instant use without tangles
- Increased cut resistance under load, e.g. over sharp edges
- Durably water repellent and dirt resistant
- Significantly lower water absorption in the UIAA water-repellency test compared to ropes without ECO treatment
-
Technical information
- Diameter: 6 mm
- Weight per meter: 30 g/m
- Certification: EN 564
- Material: Polyamid/Aramid
- Sharp edge approved
- Rope Type: Cord
- Impregnation
- UIAA
-
EDELRID technologies
-
PDF downloads
-
Safety instructions & manufacturer information
- This product is part of personal protective equipment (PPE) and/or warnings and safety information are available for this product. Please refer to the instructions for use.
- Manufacturer: EDELRID GmbH & Co. KG | Achener Weg 66 | 88316 Isny i. A. | Germany | www.edelrid.com
- EmpCo Compliance Notice: This product contains the designation "ECO" or "ECO DRY" in its product name. Due to its deep integration into product names and legacy master data, this designation may continue to be used for certain existing products. A detailed explanation can be found in our EmpCo glossary and at edelrid.com/eu-en/vertical-freedom/empco.