MAGIX PRO DRY

Size:

Find your size

Sizing Chart: MAGIX PRO DRY

Here you will find the current size chart.

Breaking strength min.	Nominal diameter	Nominal weight per meter
25 daN	0,40 mm	0,15 g/m
50 daN	0,50 mm	0,25 g/m
70 daN	0,70 mm	0,40 g/m
90 daN	0,80 mm	0,55 g/m
120 daN	0,90 mm	0,75 g/m
130 daN	1,00 mm	0,80 g/m
135 daN	1,10 mm	0,85 g/m
190 daN	1,20 mm	1,10 g/m
230 daN	1,10 x 1,50 mm	1,40 g/m
280 daN	1,30 x 1,70 mm	1,80 g/m
340 daN	1,50 x 1,90 mm	2,20 g/m
470 daN	1,60 x 2,20 mm	2,90 g/m
800 daN	2,40 x 3,20 mm	5,90 g/m

Colour:

Verpackungsinhalt:

pcs

Please contact us for advice.

Description

The 8001 series is hydrophobic and therefore has hardly any weight gain in wet conditions and dries very quickly. The MAGIX PRO DRY thus offers additional safety reserves even in the most extreme conditions and underlines the performanceof the paragliders. In addition to water repellency, the innovative coating also enables us to achieve increased stiffness, greater abrasion resistance and thus a longer service life. New colors make it easier to sort and differentiate the lines when preparing for take-off on a wide variety of surfaces.
Features
- Very good spliceability
- Thermo Shield treatment for perfect handling
- Minimal elongation
- Outstanding resilience
- Good kink resistance & flexural strength
- Unsheathed aramid line with Technora® fibres
- Lifespan is highly improved
- Clearly visible and sortable colors
- PRO DRY Coating also increases resistance to UV and dirt
- PRO DRY -Coating reduces the water absorption of the line enormously –60 % less water absorption compared to uncoated lines
- High stiffness reduces the danger of catching knots during the application
- Low stickiness
Technical information
- Material: Technora®
EDELRID technologies
Thermo Shield CS

THERMO SHIELD describes a thermal treatment process that evenly and permanently anticipates the shrinkage of the yarns used. The process perfectly aligns the core and sheath yarns to achieve outstanding dimensional stability and thus guarantee the well-known suppleness.

Spliceact CS

The product attribute SPLICEACT guarantees that a line offers outstanding splicing properties thanks to the balanced ratio of yarns used in conjunction with the design parameters.

Stretchact CS

STRETCHACT indicates lines that have been stretched to make them stronger and reduce their elongation. The natural properties of the fibers are also anticipated so as to guarantee products with permanent length stability.

Pro Dry CS

PRO DRY is a high-quality coating for lines. It provides outstanding hydrophobic and oleophobic protection, enabling the lines to permanently repel water, oily substances, and dirt. It also optimizes their handling and service life.
PDF downloads
- CS - Magix Pro Dry

Technora®, Aramid-Lines

Sizing Chart: MAGIX PRO DRY

Description

Features

Technical information

EDELRID technologies

Thermo Shield CS

Spliceact CS

Stretchact CS

Pro Dry CS

PDF downloads