Static rope with aramid fibers integrated into the sheath to increase cut resistance. The high-strength aramid fibers are incorporated into the sheath during the braiding process. As a result, the INTERSTATIC PROTECT achieves significantly higher cut resistance compared to static ropes with a comparable sheath proportion and diameter. Combined with its low elongation values, the rope is particularly suitable for applications around sharp edges or for areas of use with increased requirements for resistance to cutting impacts. Available with or without a WEBLINK termination.
INTERSTATIC PROTECT 11,0MM
Static Ropes
Art. no.
Static rope with increased cut resistance
-
Description
-
Features
- Thermo Shield treatment for pleasant handling
- Tracer threads in the rope sheath indicate the rope diameter
- Increased cut resistance through the integration of aramid fibers into the rope sheath
- Caution: the rope does not eliminate the need for adequate edge protection
- Tested for use with ActSafe model ACC (applies to diameter 11.0 mm in color night)
-
Technical information
- Core proportion: 56 %
- Diameter: 11 mm
- Knotability: 1,10
- Sheath proportion: 44 %
- Schrinkage H20: 2,40 %
- Weight per meter: 77 g/m
- Minimum breaking strength: 35 kN
- Static elongation: 2 %
- Minimum breaking strength in figure-of-eight knot: 20 kN
- Certification: EN 1891 Typ A
- Material: Polyamid/Aramid
- Rope Type: Static A
-
EDELRID technologies
Fair Wear
Thermo Shield
THERMO SHIELD is the basic treatment that we apply to all our ropes to ensure they have the renowned EDELRID suppleness. The treatment involves a thermal process that perfectly aligns the core and sheath yarns. A special heat treatment relaxes then shrinks the rope’s fibers. ...
Cut Protect
CUT PROTECT: The development of a new braiding process and the combination of highstrength aramid and polyester fibers enable us to produce ropes with a higher cut resistance that still comply with the standard for dynamic mountaineering ropes. As the current standard for ...
Tracer Thread Markings
TRACER THREADS: The diameter of all EDELRID static ropes and accessory cords can be quickly and unambiguously determined from the number of tracer thread markings on the sheath. -
PDF downloads
-
Safety instructions & manufacturer information
- This product is part of personal protective equipment (PPE) and/or warnings and safety information are available for this product. Please refer to the instructions for use.
- Manufacturer: EDELRID GmbH & Co. KG | Achener Weg 66 | 88316 Isny i. A. | Germany | www.edelrid.com